Sun. Sep 26th, 2021
CSI SAP2000 Ultimate v20.1.0 Build 1415 x86/x64 Crack

ScreenShots:

Software Description: CSI SAP2000 Ultimate v20.0.0 Build 1384 x86/x64 + Crack

SAP2000 follows in thesame tradition featuring a very sophisticated, intuitive andversatile user interface powered by an unmatched analysis engineand design tools for engineers working on transportation,industrial, public works, sports, and other facilities.
The SAP name has been synonymous withstate-of-the-art analytical methods since its introduction over 30years ago. SAP2000 follows in the same tradition featuring a verysophisticated, intuitive and versatile user interface powered by anunmatched analysis engine and design tools for engineers working ontransportation, industrial, public works, sports, and otherfacilities.

From its 3D object based graphicalmodeling environment to the wide variety of analysis and designoptions completely integrated across one powerful user interface,SAP2000 has proven to be the most integrated, productive andpractical general purpose structural program on the market today.This intuitive interface allows you to create structural modelsrapidly and intuitively without long learning curve delays. Now youcan harness the power of SAP2000 for all of your analysis anddesign tasks, including small day-to-day problems. Complex Modelscan be generated and meshed with powerful built in templates.Integrated design code features can automatically generate wind,wave, bridge, and seismic loads with comprehensive automatic steeland concrete design code checks per US, Canadian and internationaldesign standards.

Advanced analytical techniques allow for step-by-step largedeformation analysis, Eigen and Ritz analyses based on stiffness ofnonlinear cases, catenary cable analysis, material nonlinearanalysis with fiber hinges, multi-layered nonlinear shell element,buckling analysis, progressive collapse analysis, energy methodsfor drift control, velocity-dependent dampers, base isolators,support plasticity and nonlinear segmental construction analysis.Nonlinear analyses can be static and/or time history, with optionsfor FNA nonlinear time history dynamic analysis and directintegration.

From a simple small 2D static frame analysis to a large complex 3Dnonlinear dynamic analysis, SAP2000 is the easiest, most productivesolution for your structural analysis and design needs

Features:
User Interface
One Window, Many Views
SAP2000 offers a single user interface to perform: Modeling,Analysis, Design, and Reporting.
 
Modeling
Templates
SAP2000 has a wide selection of templates for quickly starting anew model. SAP2000 includes parametric templates for the followingtypes of structures: Simple Beams, 3D Trusses, 3D Frames, StorageVessels, Staircases, Dam Structures, and Pipes.

Model Views
View and manipulate analytical and physical models with greatprecision. Easily define custom views and developed elevations toview and manipulate complex geometry with ease.

Grid Systems
In SAP2000, grids can be defined as cartesian or cylindrical. Thereis no limit to the number of grid systems in a model and they canbe rotated in any direction or placed at any origin within themodel.

Plans and Elevations
Plan and elevation views are automatically generated at every gridline to allow for quick navigation of the model. Users can createtheir own elevation sections by using our Developed Elevationfeature.

Interactive Database Editing
Interactive database editing allows users to edit model data in atable view which simplifies the task of making changes to themodel. Tables are easily exportable and importable from MicrosoftExcel and Microsoft Access.

Meshing Tools
Engineers have many options when it comes to mesh generation inSAP2000. Simply select the area object and then select the rulesfor the automatic mesh generator to use.

Structural Components
Joints
SAP2000 automatically create joints at structural objectintersections or internal joints when meshing structural objects.Joint coordinates and information may be displayed on screen in themodel window or in tabular format.

Frames
The frame element uses a general, three-dimensional, beam-columnformulation which includes the effects of biaxial bending, torsion,axial deformation, and biaxial shear deformations. SAP2000 has abuilt-in library of standard concrete, steel and composite sectionproperties of both US and International Standard sections.

Cables
The cable element is a highly nonlinear element used to model thecatenary behavior of slender cables under their own self-weight.Tension-stiffening and large deflection nonlinearity are inherentlyincluded in the formulation.

Tendons
Tendons are easily drawn as independent objects, with geometryspecified as straight lines, parabolas, circular curves, or otherarbitrary shapes. Tendon loads, including all losses, are easilydefined in SAP2000.

Shells
The shell element is a type of area object that is used to modelmembrane, plate, and shell behavior in planar and three-dimensionalstructures. The shell material may be homogeneous or layeredthroughout; material nonlinearity can also be considered when usingthe layered shell.

Solids
The solid element is an eight-node element for modelingthree-dimensional structures and solids. It is based upon anisoparametric formulation that includes nine optional incompatiblebending modes and is useful for modeling objects in which loading,boundary conditions, section properties, or reactions vary bythickness.

Links
A link element may exhibit up to three different types of behavior:linear, nonlinear, and frequency dependent, according to the typesof properties assigned to that element and the type of analysisbeing performed. The following link elements are available inSAP2000: Linear, Multi-linear Elastic, Multi-linear Plastic, Gaps,Hooks, Dampers, Friction Isolators, Rubber Isolators, T/CIsolators, Frequency-dependent Springs, and Frequency-dependentDampers.

Hinges
Users can create and apply hinge properties to perform pushoveranalyses in SAP2000. Nonlinear material behavior in frame elements(beam/column/brace) can be modeled using fiber hinges. Thisapproach represents the material in the cross section as discretepoints, each following the exact stress-strain curves of thematerial. Mixed materials, such as reinforced concrete and complexshapes can be represented.

Springs
Spring supports are link elements that are used to elasticallyconnect joints to the ground and can be linear or nonlinear innature. Nonlinear support conditions can be modeled to include gaps(compression only), multi-linear elastic or plastic springs,viscous dampers, and base isolators.

Loading
Automatic Code Based Loading
SAP2000 will automatically generate and apply seismic and windloads based on various domestic and international codes. SAP2000also has a sophisticated moving load generator that allows users toapply moving loads to lanes on frame and shell elements.

Wave Loads
The wave-loading feature automatically generates loading on thestructure resulting from waves, current flow, buoyancy, and wind.Multi-stepped static linear loading can be generated to simulatethe wave moving through the structure. In addition, dynamic(time-history) loading can also be generated to include inertialeffects as the wave moves through the structure.

User Loads
Define specific loads to model a wide array of loading conditionswith SAP2000 built-in user loading options.

Analysis
Overview
CSI Solvers have been tried and tested by the industry for over 35years. The SAPFire Analysis Engine can support multiple 64-bitsolvers for analysis optimization and perform both Eigen Analysisand Ritz Analysis.

Static
SAP2000 can perform both linear static and multi-step staticanalysis. The linear static analysis of a structure involves thesolution of the system of linear equations represented by K u = r.Certain types of load patterns are multi-stepped, meaning that theyactually represent many separate spatial loading patterns appliedin sequence. These include the vehicle, live, and wave types ofload patterns.

Dynamic
SAP2000 dynamic analysis capabilities include the calculation ofvibration modes using Ritz or Eigen vectors, response-spectrumanalysis, and time-history analysis for both linear and nonlinearbehavior.

Buckling
Linear (bifurcation) buckling modes of a structure can be foundunder any set of loads. Buckling can be calculated from a nonlinearor staged-construction state. Full nonlinear buckling analysis isalso available considering P-delta or large deflections effects.Snap-through buckling behavior can be captured using staticanalysis with displacement control. Dynamic analysis can be usedfor modeling more complex buckling, such as follower-loadproblems.

P-Delta
P-delta analysis captures the softening effect of compression andthe stiffening effect of tension. A single P-delta analysis undergravity and sustained loads can be used to modify the stiffness forlinear load cases, which can later be superposed. Alternatively,each combination of loads can be analyzed for full nonlinearP-delta effects. P-delta effects are included for all elements andare seamlessly integrated into analysis and design.

Pushover
Pushover analysis features in SAP2000 include the implementation ofFEMA 356 and the hinge and fiber hinge option based onstress-strain. The nonlinear layered shell element enables users toconsider plastic behavior of concrete shear walls, slabs, steelplates, and other area finite elements in the pushover analysis.Force-Deformation relations are defined for steel and concretehinges.

Time Dependent
Staged construction is a type of nonlinear analysis in SAP2000 thatis allows you to define a sequence of stages wherein you can add orremove portions of the structure, selectively apply load toportions of the structure, and to consider time-dependent materialbehavior such as aging, creep, and shrinkage.

Power Spectral Density
Power-spectral-density analysis is available to determine theprobabilistic response of a structure due to cyclic (harmonic,sinusoidal) loading over a range of frequencies. This is useful forfatigue studies, random response due to earthquakes, and otherapplications. Multiple loads may be applied at different phaseangles, and may be correlated or uncorrelated.

Steady State
Steady state analysis is available to determine the response of thestructure due to cyclic (harmonic, sinusoidal) loading over a rangeof frequencies. Frequency-dependent stiffness and damping (compleximpedance) properties may be included for modeling foundations andfar-field effects, including radiation damping. Steady stateanalysis can be used to measure the effects of multiple machinesoperating at different frequencies can be considered by combiningthe results of several analyses in the same model.

Target Force
During nonlinear static analysis, cable and frame elements can beautomatically strained to achieve specified target axial forcevalues. This is most commonly used to tighten cables topre-specified tensions, but it can also be used to jack structuresto a specified force using frame elements, as well as otherapplications.

Load Combinations
SAP2000 allows for an unlimited number of load cases andcombinations. Load combination types include: linear additive,envelope (min/max), absolute add, SRSS, and range combinations.Combination components can include other combinations.

Model Alive
For small to medium sized structures, analysis can be performed onthe fly as you build and modify the model. For each change you maketo the geometry, properties, or loading, the structure instantlyresponds with the new deformed shape, moment diagram, or any otherplot of results. It’s like working with a live model, and it is avery powerful tool for conceptual design and for testing “what-if”scenarios.

Steel Frame
Fully integrated steel frame design includes member sizeoptimization and implementation of design codes. SAP2000 allowsusers to interactively view design results at any frame member,change the parameters or section properties, and display theupdated member results.

Concrete Frame
Fully integrated concrete frame design in SAP2000 includes:required area of steel calculations, auto selection lists for newmember sizing, implementation of design codes, interactive designand review, and comprehensive overwrite capabilities.

Deformed Geometry
Users can display deformed geometry based on any load orcombination of loads, as well as animations of modes.

Force Diagrams
Shear and moment diagrams display internal shear forces, moments,and displacements at all locations along the length of a frameelement for any load case or load combination. SAP2000 gives theoption to scroll along the length to display values or scrolldirectly to the maximum value location.

General Displacement
Arbitrary displacement measures can be defined using generalizeddisplacements. These are linear combinations of joint translationsand rotations, and can be used to calculate averages, drifts, andother quantities of interest. Generalized displacement output canbe obtained for all types of analysis cases and combinations.

Section Cuts
The resultant (free-body) forces and moments across any cut in thestructure can be defined using section cuts. A section cut can haveany shape, and can be used to compute story shears, connectingforces, design forces in shear walls, and for many other purposes.Section cut results can be obtained for all types of load cases andcombinations.

Virtual Work Diagrams
In SAP2000, virtual work diagrams can be used as an aid todetermine which elements should be stiffened to achieve the mostefficient control over the lateral displacements of astructure.

Influence Lines
SAP2000 uses influence lines to compute the response to vehiclelive loads. Influence lines are also of interest in their own rightfor understanding the sensitivity of various response quantities tomoving loads. Influence lines may be displayed in the userinterface for the displacement, force, or stress response of anyelement in the structure.

Tabular Output
SAP2000 has the ability to display tables for all input data,analysis results, and design results. Tables support sort, cut,copy and paste for use in other programs. Print or save tabulardata to Access, Excel, Word, HTML, or TEXT.

Video Animations
SAP2000 has the ability to generate video (.avi) files to visuallydisplay a set of analysis results that vary over a particular timeperiod, such as in a time history analysis.

Reporting
Quick Report
Pre-formatted printed reports are now available at the push of abutton. These reports include all pertinent model data and theresults of analysis and design. Data is presented in tabulatedformat, along with graphics, table of contents, and a cover sheetdisplaying project information and your company name and logo.

Advanced Report Writer
The Advanced Report Writer is a robust utility that can be used forcreating sophisticated reports of the SAP2000 model. These reportsare fully customizable; companies can define and save complextemplate files to standardize the analysis and design reportgeneration.

Tools
Load Optimizer
The load optimizer is a tool in SAP2000 to compute the optimal loadapplication to achieve desired structural response. Loads may beapplied linearly, nonlinearly, or in staged-construction. Goals andlimits may include displacements, forces, moments, and more.

Section Designer
Section Designer is a utility that is built into SAP2000. It allowsusers the ability to create specialized sections of any arbitraryshape and material, including rebar layout. All sectionsproperties, biaxial interaction diagrams, and moment curvaturediagrams are automatically calculated.

Import and Export
Supported Formats
SAP2000 supports many industry standards for importing andexporting data. Autodesk Revit Structure, Tekla Structures, AutoCAD(DXF/DWG), CIS/2, IFC, IGES, and SDNF are all supported. SAP2000also supports exporting of a model to an Microsoft Access database.If users are using other analysis packages, SAP2000 can importfiles from FrameWorks Plus, STAAD, and STRUDL. 

Installer Size: 595 + 570 MB

Download Links : CSI SAP2000 Ultimate v20.0.0 Build 1384 x86/x64 Crack Patch

[Mirror Download]
[Mediafire]

Leave a Reply

Your email address will not be published. Required fields are marked *