Software Description: Multi-Instrument Pro v3.8 Keygen Serial
Multi-Instrument is apowerful and user-friendly sound card based multi-function virtualinstrument software.
It supports a variety of hardware ranging from sound cards toproprietary ADC & DAC hardware such as NI DAQmx cards.
Here are some key features of “Multi InstrumentPro”:
Dual-trace waveform, Waveform addition and subtraction, LissajousPattern, transient /long-time signal recording, voltmeter. Variousdigital filters are supported.
– Spectrum Analyzer:
RMS amplitude spectrum, relative amplitude spectrum, octaveanalysis (1/1,1/3,1/6, /12,1/24), frequency compensation, frequencyweighting (A,B,C,ITU-R 468), peak hold, averaging, measurement ofTHD, THD+N, SNR, SINAD, Noise Level, IMD, Bandwidth and Crosstalk,phase spectrum, auto correlation function, cross correlationfunction, coherence function, transfer function, impulse response.Support 55 window functions and window overlap.
– Signal Generator:
Function generation, multitone generation, arbitrary waveformgeneration, burst tone generation, MLS generation, DTMF generation,musical scale generation, white noise and pink noise generation,and frequency/amplitude sweep. Synchronized operation between thesignal generator and the oscilloscope is supported.
voltmeter, sound pressure level meter(dB, dBA, dBB, dBC), frequencycounter, RPM meter, counter, duty cycle meter, F/V converter. Thecounter trigger level and hysteresis can be adjusted.
– Spectrum 3D Plot:
including waterfall and spectrogram.
– Data Logger
– LCR meter
– Device Test Plan:
Device Test Plan provides a mechanism for you to configure andconduct your own device test steps. It takes the advantage of thesound card’s capability of simultaneous input & output, to generatea stimulus to the Device Under Test (DUT) and acquire the responsefrom that device at the same time. Different stimuli can begenerated and the response can be analyzed in different ways.
Installer Size: 93.2 MB